T2-A20-OLinuXino-MICRO -e8Gs16M-IND

EMBEDDED ARM LINUX COMPUTER WITH ALLWINNER A20 1GB RAM AND MEGABIT ETHERNET

Linux-enabled Allwinner A20 development board with Ethernet, HDMI output, 1GB DDR3 RAM memory, two SD card connectors, plenty of free GPIOs and much more.
Open source hardware and open source software A20 Linux board with 0.1" step connectors for easier access and evaluation.

We offer several variants of this board. Aside from the base version we offer a variant with extra eMMC or NAND flash memory (suffix -e4G, -e16G, or -n8G); we have a variant with 16M SPI flash memory (suffix -s16M). We also have variants of the board suitable for industrial temperature range of operation (-40+85)C - these come with the "T2" chip and have "-IND" suffix in the name.

FEATURES

·         Allwinner A20 (T2) dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU; capable of FullHD (1080p) video playback 

·         1GB DDR3 RAM memory

·         Optional 4GB or 16GB eMMC flash memory (in xxx-e4Gyyy or xxx-e16Gyyy board variants)

·         8GB NAND flash memory option (in xxx-n8G variant)

·         2KB EEPROM for MAC address storage and more

·         100Mbit native Ethernet with controller and connector

·         Battery connector with battery-charging capabilities

·         SATA connector and 5V HDD power connector

·         HDMI connector

·         2 x USB High-speed host with power control and current limiter

·         USB-OTG with power control and current limiter

·         VGA output on 6-pin 1.25mm (0.05") step connector

·         Audio headphones output

·         Microphone input on connector

·         2 x UEXT connectors

·         LCD connector compatible with with 4.3", 5", 7.0", 10.1", 15.6" Olimex-made LCDs

·         160 GPIOs on three GPIO connectors

·         MicroSD card connector

·         SD/MMC card connector

·         DEBUG-UART connector for console debug with USB-SERIALcable

·         GPIO LED

·         Battery charge status LED

·         Power LED

·         10 BUTTONS with ANDROID functionality + RESET button

·         4 mount holes

·         6-16VDC input power supply, noise immune design up to Rev.I

·         8-24VDC input power supply, noise immune design Rev.J or later

·         PCB dimensions: (5600 x 3250) mils ~ (142.24 x 82.55) mm

·         Ambient temperature (0 - 70)°C for non industrial boards

·         Ambient temperature (-45 +85)°C for -IND boards

   DOCUMENTS

·         User's manual

·         Olimage Linux guide

·         A20's official web page

·         A20-OLinuXino-MICRO European Declaration of Conformity

·         A20-OLinuXino-MICRO UKCA Declaration of Conformity

HARDWARE

·         GitHub repository for the OLINUXINO project - source files, documentation, examples and more

SOFTWARE

·         Recommended Olimage Linux images

·         Olimage Linux guide
FTP folder with older official Linux images 

       outdated wiki article with Linux usage and build instruction for older images